AgiBot A2 (Yuanzheng) vs Gael InMoov
Generated from the registry · revision 2026-09-26 · openness out of 100
No height, mass, DOF or payload figure is sourced for both AgiBot A2 (Yuanzheng) and InMoov yet. Openness score: AgiBot A2 (Yuanzheng) 0, InMoov 70 (of 100); only InMoov publishes CAD, BOM, FW and SW. Availability: AgiBot A2 (Yuanzheng) buy, InMoov diy build.
01
Side by side
■ rows differ| Field | AgiBot (Zhiyuan Robotics)AgiBot A2 (Yuanzheng) | Gael LangevinGael InMoov | Δ first − second |
|---|---|---|---|
| Identity | |||
| Maker (differs) | AgiBot (Zhiyuan Robotics) | Gael Langevin | |
| Class | Humanoid | Humanoid | |
| Status | Active | Active | |
| Availability (differs) | Buy | DIY build | |
| Country (differs) | China | France | |
| Year (differs) | 2024 | 2012 | |
| Specifications | |||
| Height | 169cm | —unsourced | |
| Mass | 69kg | —unsourced | |
| Degrees of freedom | 40 | —unsourced | |
| Payload | —unsourced | —unsourced | |
| Top speed | —unsourced | —unsourced | |
| Runtime | 120min | —unsourced | |
| Battery capacity | 700Wh | —unsourced | |
| Price | —unsourced | —unsourced | |
| Actuators | —unsourced | hobby servos | |
| Compute | —unsourced | Arduino + PC running MyRobotLab | |
| Sensors | 360° LiDAR, six HD cameras incl. RGB-D and fisheye, force/torque sensors, mic array | —unsourced | |
| Openness and provenance | |||
| Openness bar | |||
| Openness score (differs) | 0/ 100 | 70/ 100 | −70 |
| CAD (25) (differs) | not public | public | |
| Bill of materials (20) (differs) | not public | public | |
| Sim model (URDF/MJCF) (20) | not public | not public | |
| Firmware (15) (differs) | not public | public | |
| Software (10) (differs) | not public | public | |
| Trained policies (10) | not public | not public | |
| Verification level (differs) | L0 | L1 | |
| Sources (differs) | 2 | 6 | |
| Last checked (differs) | 2026-09-24 | 2026-09-25 | |
A dash is an unsourced figure, not zero. Sources for each robot are listed on its spec sheet: AgiBot A2 (Yuanzheng), InMoov.
02