Gael InMoov vs Unitree R1
Generated from the registry · revision 2026-09-26 · openness out of 100
No height, mass, DOF or payload figure is sourced for both InMoov and Unitree R1 yet. Openness score: InMoov 70, Unitree R1 30 (of 100); only InMoov publishes CAD, BOM and FW; only Unitree R1 publishes SIM. Availability: InMoov diy build, Unitree R1 buy.
01
Side by side
■ rows differ| Field | Gael LangevinGael InMoov | Unitree RoboticsUnitree R1 | Δ first − second |
|---|---|---|---|
| Identity | |||
| Maker (differs) | Gael Langevin | Unitree Robotics | |
| Class | Humanoid | Humanoid | |
| Status | Active | Active | |
| Availability (differs) | DIY build | Buy | |
| Country (differs) | France | China | |
| Year (differs) | 2012 | 2025 | |
| Specifications | |||
| Height | —unsourced | 123cm | |
| Mass | —unsourced | 29kg | |
| Degrees of freedom | —unsourced | 26 | |
| Payload | —unsourced | —unsourced | |
| Top speed | —unsourced | —unsourced | |
| Runtime | —unsourced | 60min | |
| Battery capacity | —unsourced | —unsourced | |
| Price | —unsourced | 5,900USD | |
| Actuators (differs) | hobby servos | Unitree in-house electric joint motors | |
| Compute (differs) | Arduino + PC running MyRobotLab | 8-core CPU; optional Jetson Orin (40-100 TOPS) | |
| Sensors | —unsourced | 4-mic array, monocular or binocular camera, joint encoders | |
| Openness and provenance | |||
| Openness bar | |||
| Openness score (differs) | 70/ 100 | 30/ 100 | +40 |
| CAD (25) (differs) | public | not public | |
| Bill of materials (20) (differs) | public | not public | |
| Sim model (URDF/MJCF) (20) (differs) | not public | public | |
| Firmware (15) (differs) | public | not public | |
| Software (10) | public | public | |
| Trained policies (10) | not public | not public | |
| Verification level | L1 | L1 | |
| Sources (differs) | 6 | 2 | |
| Last checked (differs) | 2026-09-25 | 2026-09-24 | |
A dash is an unsourced figure, not zero. Sources for each robot are listed on its spec sheet: InMoov, Unitree R1.
02